Enterasys Matrix X Router Installation Manual page 24

Pre-Installation Tasks
2. Use the information from the output of the show system hardware command to
fill out the worksheet in Table
a.
b. Use the value of "940 Serial number:" from the output of the show system
Table 1-1 Worksheet: DC Compliance of Modules in Existing AC Systems
Model Part No.
940
Example: X-CM-00 940
3. Compare the values in the shaded cells of the completed worksheet in Table
minimum values shown in Table
the installed modules.
1-6 DC Power Supply Installation
Note: In the CLI output for show system hardware, model name part numbers of modules
are labeled "Part number."
Use the value of "940 Part number:" from the output of the show system
hardware command to fill out the 940 Part Number section of Table
hardware command to fill out the 940 Serial Number section of Table
940 Part Number
Last 4 digits of Site Code
940 Number
4179 000
1‐1 for each module as follows:
940 Serial Number
Date Code Serial Site
(year, work Number Code
week) Counter
0747 5281 63
1‐3 on page 1‐8 to determine the DC compliance of
1‐1.
1‐1.
DC Compliant?
940
Revision
5A YES
1‐1 to the