Logging In Locally To The Conductip Mra - Matrox ConductIP Installation And User Manual

Logging in locally to the ConductIP MRA

You can log in to the ConductIP MRA by connecting a monitor, keyboard, and mouse to the
device and booting it up. Logging in locally is typically used for the following:
• Creating the Administrator account as part of the initial setup process. Although this is
usually done by remote login, you have the option of doing it by logging in locally. For
more information on this, see the Matrox ConductIP MRA Setup sheet included with
your device, or download it from our website.
• Accessing the Recovery Tools for troubleshooting or technical support purposes.
• Finding the IP address of the ConductIP MRA. When the log in page appears, the IP
address is shown on the bottom left of the screen.
To log in to the ConductIP MRA:
Step 1.
Step 2.
Step 3.
Step 4.
Step 5.
Step 6.
Step 7.
Result of this task: You are logged in to the ConductIP locally on the MRA.
Part # V11550-301-0101(1)
Connect your power cable to the ConductIP MRA.
Connect an HDMI monitor to the HDMI port.
Connect a keyboard and mouse to any of the USB ports. The ports indicated
may be the most accessible.
Connect the ConductIP MRA to your network via the LAN port on the far
right.
Press the power button (
When the ConductIP boots up you will see the initial splash screen. After a
few seconds the
ConductIP Boot Menu
Select to access the ConductIP user interface, or select
ConductIP
to access the options required for technical support purposes.
Tools
Enter the user credentials to start a ConductIP session.
) on the front of the ConductIP MRA to turn it on.
will appear.
Wait a few
seconds
Last updated: March 24, 2023
| 13 |
Recovery