Matrox ConductIP Installation And User Manual page 12

Step 7.
Step 8.
Step 9.
Step 10.
Step 11.
Step 12.
Step 13.
Part # V11550-301-0101(1)
Update security certificate: When you log in to ConductIP, you typically
receive a warning that the security certificate is not valid. You can ignore this
warning each time you log in, but it is better to update your computer certifi-
cate store to verify the ConductIP user interface and remove the warning.
More info: Managing ConductIP certificates
Specify your NMOS registry: You need to specify which NMOS registry
server ConductIP will use, as well as any redundancy servers if applicable. You
can use ConductIP's internal registry server, or you may already have one
available.
More info: Connecting to an NMOS registry server
Update Matrox ConductIP: There may be a more recent firmware version
available for your ConductIP from the Matrox website. It is recommended to
always use the latest version. Ignore this step if you already have the latest ver-
sion of ConductIP.
More info: Updating Matrox ConductIP
Confirm that your devices appear: Whenever you log in to ConductIP, the
available NMOS devices on your network will automatically appear in the
device bin. If no devices appear, there may be a network issue that is interfer-
ing with ConductIP's scanning.
Create users: As an Administrator, you will need to create user accounts for
the ConductIP. You can create other Administrators, Super operators, and
Operators. Each user type has specific permissions.
More info:
Matrox ConductIP roles

Creating user accounts

Create and configure your Rooms: By default, a single Room is created for
you when you first start with ConductIP. At minimum, you will need to
rename and configure that room for your specific workflow. Depending on
your needs, you may need to create more rooms for your users.
More info:
About the Matrox ConductIP User Interface

Creating rooms

Adding groups and devices to rooms

(Optional) Create your Panels: The Panels page is where you make the con-
nections between devices and set up your streaming workflow. This step is
optional because ConductIP automatically creates a panel every time you cre-
ate a room. However, you can create other panels when needed or change the
names of your panels to customize your workspace.
More info:
About the Matrox ConductIP User Interface

Creating panels

Connecting senders and receivers

Last updated: March 24, 2023
| 8 |