Finding Matrox ConductIP on your network
When Matrox ConductIP is connected to your network, it will boot up in DHCP mode and
broadcast itself in mDNS (multicast DNS). This means that you can connect to from your web
browser by typing https://conductip in the address bar, or by typing the IP address (e.g. https://
192.168.12.345). The mDNS capability ensures that the domain name is recognized.
If the mDNS address system does not work (e.g. if your computer does not have Bonjour or
Avahi installed), you can always use the IP address to connect to ConductIP.
You can find the IP address as follows:
•
Connect an HDMI monitor: If an HDMI monitor is connected to the ConductIP
hardware when you turn it on, the IP address will be displayed on the monitor. This is
the simplest way to find the IP address if you have a monitor available and have access
to the ConductIP MRA.
•
Use Matrox ConvertIP Manager: The Matrox ConvertIP Manager utility that is
offered with the Matrox ConvertIP devices allows you to find any ConvertIP device on
the network, as well as the ConductIP MRA if it is on the same subnet.
When you know the IP address of your ConductIP, you can bookmark it in your web browser
for easier and quicker access.
Part # V11550-301-0101(1)
| 11 |
Last updated: March 24, 2023
Need help?
Do you have a question about the ConductIP and is the answer not in the manual?