Table of Contents
Advertisement
3.2.2.7
1 To send a Status, press and hold the Single Touch button assigned to Status.
2 The Status alias programmed to Single Touch is displayed for one second.
3 Either an Ack Received message or a Status Fail message is displayed after the Status
has been sent.
4 Once the Status is sent, operation continues as normally would in a Status. For example
the same buttons are available for use as they would be by sending a Status through the
menu.
5 The Status is not able to be exited while sending unless it is canceled by another
function. The user must wait for the Ack or the Fail message.
3.2.2.8
1 To start an Interconnect Call, press and hold the Single Touch button assigned to Inter-
connect.
2 The alias of the phone number being called will be displayed.
3 Once the call is started through Single Touch, operation continues as normal for
Interconnect Call.
4 To exit the call either press the Clear button or the Single Touch button assigned to
Interconnect.
5 To answer an Interconnect Call with the Single Touch button press and hold it.
6 Once pressed and held the incoming call will be answered and operation will continue
as would on a normal Interconnect Call answer.
3.2.2.9
In Armada the Unit Call can be set to Standard or Enhanced. Single Touch supports both
and they each operate the same as a normal Standard or Enhanced Unit Call. To answer a
unit call the PTT needs to be pressed after the Single Touch button is pressed and held.
To Send a Single Touch Unit Call
1 To send a Unit Call press and hold the Single Touch button assigned to Unit Call.
2 For the radio to send, the Unit Call Usage in Armada under Systems (Smartnet/
Draft 02 - Sep 1 2015
Smartzone) → Lists → Call Settings must be set to Unlimited or List Only.
Viking Mobile Radio Operating Manual
P25 Status
P25 Interconnect
SNSZ Unit Call
General Operation
3-17
Advertisement
Table of Contents
