Viking Led Failure Codes - E.F. Johnson Company Viking VM600 Operating Manual

Table of Contents

Advertisement

Tones & Error Messages
Message Enumerations
SECURE_ONLY
SLAVE_SCAN
STATUS_FAILED
TEMP_HOT
TEMP_TOO_HOT
TX_TIMEOUT
VOLTAGE_HIGH
VOLTAGE_LOW
ZONE_FAIL
9.3

Viking LED Failure Codes

Orange LED Blinks
2
3
4
Draft 02 - Sep 1 2015
9-8
Portable/SCH/LCH
Strings
"Secure Only"
"SECR ONLY"
"Secure Only"
"Slave Scan"
"SLAVE SCAN"
"Slave Scan"
"Status Fail"
"STS FAILED"
"Status Fail"
"Hot"
"HOT"
"Hot"
"Too Hot"
"TOO HOT"
"Too Hot"
"Tx Timeout"
"TX TIMEOUT"
"Tx Timeout"
N/A
"VOLT HIGH"
"Voltage High"
N/A
"VOLT LOW"
"Voltage Low"
"Zone Fail"
"ZONE FAIL"
"Zone Fail"
Startup Failure
Bad File Format
Parms Fail
Bad Band
Description
The user is attempting to transmit Clear on a Strapped Secure
channel.
If a conventional scan list is slaved to the current zone, this
error will occur if the user attempts to select or edit another
conventional scan list.
This error indicates that no acknowledgement was received
while sending a status report.
This error indicates that the mobile has passed the hot
temperature threshold. If the user transmits in this condition,
the radio will display "Hot" and "Low Power". Transmit power
will be forced low.
This error indicates that the mobile has passed the TOO HOT
temperature threshold. Under these conditions the radio will
not allow transmit.
This error indicates that the transmit timeout timer has expired
and transmit has been terminated.
The mobile's voltage source is too high. Transmit is not
allowed in this condition.
The mobile's voltage source is too low. Transmit is not
allowed in the condition.
If Site Trunking and Display Site Trunking are enabled, this
will be displayed if the zone controller goes down.
Description
The parameter file has a newer file format version than what
matches the software in the radio.
There is no parameter file in the radio.
The radio band in the parameter file does not match the radio
band in the tuning parameters. You will see this message if a
parameter file for the wrong band is downloaded to the radio.
Viking Mobile Radio Operating Manual

Advertisement

Table of Contents
loading

Table of Contents