Table of Contents
Advertisement
If the user presses the ON/OFF/Volume knob while soft is in effect, the radio returns to
full power up operation.
3.1.2
Settings retained through power cycle of the Viking mobile radios include.
Global Persistent Settings
Scan
Radio Wide Scan
Secure
Tones
Tx Power
Radio Inhibit
Keypad Lockout
Conventional Persistent Settings
Selective Squelch
Repeater Talk Around
Display / Information
Disable Call Guard
P25 Trunking Persistent Settings
Dynamic Regrouping
Site Lock
SmartNet/SmartZone Persistent Settings
Dynamic Regrouping
Site Lock
3.1.3
The power-up password feature prevents unauthorized use of the radio by requiring that a
four to twelve digit password be entered to make it operational. This feature is enabled or
disabled by programming.
When it is enabled, "ENTER PSWD" (Standard Control Head) or "Enter Password"
(Lightning Control Head) is briefly displayed when power is turned on, the four to twelve
digit numeric password must be entered by pressing and rotating the Select switch. A
single beep sounds when the switch is pressed (if that option is enabled). If an incorrect
Draft 02 - Sep 1 2015
password is entered, "INCORRECT" is displayed and it must be re-entered.
Viking Mobile Radio Operating Manual
Persistent Settings
Power-Up Password
General Operation
3-3
Advertisement
Table of Contents
