Table of Contents
Advertisement
Radio Wide Features
• A Wi-Fi-connected radio goes out of range.
• An Ethernet-connected radio gets its Ethernet cable disconnected suddenly.
- When you disconnect a radio's USB programming cable to replace it with a Wi-Fi
dongle—or vice versa—wait at least 3 seconds after you disconnect the first device
before you connect the second device.
• Miscellaneous unexpected network events occur.
USB connections can interfere with OTIP connection and disconnection events. Do not
use OTIP with more than 2 USB-connected radios. (EFJohnson plans to address this
limitation in a future Armada release.)
4.15.4.2
Do not try to update a single radio from multiple instances of Armada at the same time. In
general, radio administrators are expected to coordinate with each other when managing
radios. OTIP is designed to allow a radio service center to connect to mobile radios
without running cables.
4.16 Auto / Unmute
The user can mute the radio so they do not have to listen to dispatch. (An example is an
EMT who uses a radio's call alert feature for notification of an emergency event.) When
receiving a call alert the radio will automatically unmute and notify the EMT of the event.
If the user has the radio muted, this feature automatically unmutes the radio if certain
programmable events occur. These events include the reception of a Call Alert, Unit Call,
or Emergency Call.
4.17
Location Services
Location Services provides GPS location information to the radio user and to network
administrators using a standardized IP based protocol. For example, a radio can send its
current location over the radio network and then IP to an application that is mapping user
locations. That application can also send commands to the radio telling it what data to
report and when to report it.
Draft 02 - Sep 1 2015
4-18
Concurrent Transfers
Viking Mobile Radio Operating Manual
Advertisement
Table of Contents
