Advertisement
Table of Contents
SIGNAL WORDS
SIGNAL WORDS appear in this manual to draw the reader's attention to important safety-related
messages. The following are signal words used in this manual and their definitions.
DANGER
WARNING
CAUTION
NOTICE
SAFETY INSTRUCTIONS
Vestil strives to identify foreseeable hazards associated with the use of its products, but no manual
can address every conceivable risk. Minimize the likelihood of injury by observing the hazards
identified below and by inspecting and maintaining the product as instructed in
MAINTENANCE
on p. 6.
Risks of serious personal injuries or death.
Read and understand the entire manual before assembling, using, inspecting, or
servicing the baler.
Read and understand the entire manual before installing, using, or servicing the product.
Read the manual whenever necessary to refresh your understanding of proper use and
maintenance procedures.
DO NOT attempt to resolve any problem(s) with the product unless you are both
authorized to do so and certain that it will be safe to use afterwards.
DO NOT modify the product in any way UNLESS you first obtain written approval from
Vestil. Unauthorized modifications automatically void the
make the product unsafe to use.
Inspect the product at least once per month. DO NOT use this product if the inspection
reveals structural damage. Examples of structural damage include, but are not limited to,
the following: 1) Cracked, broken, or otherwise damaged welds; 2) Missing or obscured
reflective tape (see item no. 3 on p. 3) or weak reflectivity of reflective tape ( on
Corrosion, severe wear, or other condition that affect the integrity of the bollard. Replace
each part that fails to pass an inspection. DO NOT use the product until it is fully restored to
satisfactory condition. See
DO NOT use the product if it is not securely anchored to the ground/surface. The bollard
should not wobble. Relocate the bollard if it cannot be securely anchored to the
ground/surface.
Replace the bollard immediately after it sustains damage. NOTE: Damaged sustained as
a result of the bollard's intended/designed use is not covered by the warranty.
DO NOT use this device UNLESS all labels (see
undamaged. Replace damaged labels as soon as damage occurs.
Proper use, maintenance, and storage are essential for this product to function properly.
o Always use this product in accordance with the instructions in this manual and consistent
with any training relevant to machines, devices, etc. used in conjunction with this product.
o Keep the product clean & dry. Lubricate moving parts.
Table of Contents
Rev. 3/1/2023
Identifies a hazardous situation which, if not avoided, WILL result in DEATH
or SERIOUS INJURY. Use of this signal word is limited to the most extreme
situations.
Identifies a hazardous situation which, if not avoided, COULD result in
DEATH or SERIOUS INJURY.
Indicates a hazardous situation which, if not avoided, COULD result in MINOR
or MODERATE injury.
Identifies practices likely to result in product/property damage, such as
operation that might damage the product.
WARNING
RECORD OF SATISFACTORY CONDITION
NOTICE
Copyright 2023 Vestil Manufacturing Co
LIMITED WARRANTY
on p. 4.
LABELING
DIAGRAM) are clearly visible and
BOL MANUAL
INSPECTIONS &
and might
p.
3); 4)
Page 2 of 7
Advertisement
