UA-5200 Series User Manual V.3.0.0
ICP DAS
B. MQTT Output Setting Example
The UA-5200's MQTT Output is used to convert other Input's data into the MQTT message, using a
user-defined topic as an index to receive the data sending from other MQTT devices.
The following steps will show you the way to convert the Modbus Master Input's data into the
MQTT message.
The user can also refer the Chapter 3. System Function Description -
Section 3.6 Output
to view all
features, properties and configuration notice for each item mentioned in this section.
Step 1
Add all needed variables in the variable table. (See
Section
2.2)
Step 2
Set up the Modbus Input, and assign variables to the Input. (See
Section
2.4.1)
33