Start A Built-In Mqtt Broker - ICP DAS USA UA-5200 Series User Manual

UA-5200 Series User Manual V.3.0.0 ICP DAS

2.3. Start a Built-in MQTT Broker

If the MQTT and MQTT JSON communication of the project use the built-in MQTT Broker, you
need to enable it before setting communication. The enabling function is in the "System
Management".
Step 1
Click "System Management" on the left tree-menu, and then scroll down the right webpage to the
"MQTT Broker Setting" box that is the settings for the built-in MQTT Broker.
Step 2
Click the switch of the "MQTT Broker status" to enable the Broker. When it shows "ON" that
means the Broker is running. According to user's needs, the user can set up other setting items.
22