Add Variables In The Variable Table - ICP DAS USA UA-5200 Series User Manual

UA-5200 Series User Manual V.3.0.0 ICP DAS

2.2. Add Variables in the Variable Table

After login, the user can set up the project by clicking the main menu on the left side of the web
interface. (Refer to 3. System Function for more.)
First, set up the variables. The following steps will show how to add variables in the variable table.
Step 1
Click "Variable Setting" on the left main menu to open the Variable Setting page.
Step 2
Click "Add" to add the needed variable.
19