Set Up The Input, Virtual Device And Output - ICP DAS USA UA-5200 Series User Manual

2.4. Set Up the Input, Virtual Device and Output

The UA-5200 is a Communication Server that down to interact with the I/O modules
(Modbus/MQTT) and up to interact with the host (OPC UA/MQTT). The "Input" setting of
tree-menu is mainly related to the communication with the down side I/O modules. The "Output"
setting of tree-menu is mainly related to the communication with the up side host. The input data
via the UA-5200 converting and programming will be sent to the up side host for the application
platform/software/system/cloud /equipment/database that support client-end OPC UA/MQTT
communication.
This section will describe the Input, Virtual Device, and Output settings. The user can also refer
the Chapter 3: System Function Description
notices.
Description of the Setting Steps:
All function settings follow the task-oriented and level logic architecture. First, the user can add a
connection Task depends on device properties, and then add Command or Item table under the
Task. Finally, you can complete two-level or three-level settings.
to view all features, properties and configuration
Section 3.4 Input
Section 3.5 Virture Device
Section 3.6 Output
Task
Level 1:
ommand
Level 2: C
Level 3:
Description of the tool button:
: Add a task, command, or item.
: Delete a task, command, or item.
: Modify a task, command, or item.
UA-5200 Series User Manual V.3.0.0
Level 2:
Item Table
23
Item Table
ICP DAS