Siemens SICHARGE UC Installation And Commissioning Manual page 64

No.
6 Ensure that the SICHARGE UC MastPanto is correctly aligned with the threaded rods of the base
area
7 Lower the SICHARGE UC MastPanto onto the bolts with nuts and washers
8 Put the washers on the threaded rods
9 Screw the nuts onto the threaded rods
10 Align the SICHARGE UC MastPanto on the threaded rods
11 Tighten the nuts with a torque of 220 Nm
12 Turn the lock nuts slightly away from the nuts
13 Apply a screw lock to the threaded rods
14 Screw on a second set of nuts. Tighten the lock nuts with a torque of 220 Nm
15 Mark the position of the nuts
16 Seal the openings from the base area to the mounting plate with a suitable sealant to prevent the
ingress of moisture, animals and insects
17 Remove the sling gear from the SICHARGE UC MastPanto
Figure 6-7
Installation and Commissioning Checklist for SICHARGE UC
Product Information, 03/2023, A5E52548271-AA
Checklist item
Mounting the mast
SICHARGE UC MastPanto
6.2 Installation
P F N/A
☐ ☐ ☐
☐ ☐ ☐
☐ ☐ ☐
☐ ☐ ☐
☐ ☐ ☐
☐ ☐ ☐
☐ ☐ ☐
☐ ☐ ☐
☐ ☐ ☐
☐ ☐ ☐
☐ ☐ ☐
☐ ☐ ☐
63