Siemens SICHARGE UC Installation And Commissioning Manual page 54

Connect the vehicle
No.
1 Connect the hood to a vehicle with low SoC (< 60%)
2 HMI displays vehicle connected
Cable check
No.
1 Wait a few seconds
2 HMI displays cable check
3 Voltage ramps up near to 500 V during a few seconds and then goes back to 0 V.
Pre charge
No.
1 Wait a few seconds
2 HMI displays pre charge
3 Voltage ramps up to match vehicle battery voltage
Current Demand
No.
1 Wait a few seconds
2 HMI displays charging
3 Current ramps up to match vehicle battery request
Stop Charge
No.
1 Wait a few seconds
2 HMI displays charging
Stop the Log
No.
1 Stop the Log and save it
2 See the recorded Log in the laptop
Installation and Commissioning Checklist for SICHARGE UC
Product Information, 03/2023, A5E52548271-AA
Checklist item
Checklist item
Checklist item
Checklist item
Checklist item
Checklist item
SICHARGE UC MastHood
5.4 Commissioning
P F N/A
☐ ☐ ☐
☐ ☐ ☐
P F N/A
☐ ☐ ☐
☐ ☐ ☐
☐ ☐ ☐
P F N/A
☐ ☐ ☐
☐ ☐ ☐
☐ ☐ ☐
P F N/A
☐ ☐ ☐
☐ ☐ ☐
☐ ☐ ☐
P F N/A
☐ ☐ ☐
☐ ☐ ☐
P F N/A
☐ ☐ ☐
☐ ☐ ☐
53