Siemens SICHARGE UC Installation And Commissioning Manual page 38

Hide thumbs Also See for SICHARGE UC:

Table of Contents

Checking the charging session

No.

Connect the CCS plug to the CCS inlet of the vehicle

Set the charger to "Cable check" mode and verify that the voltage rises to almost 500 V within a

few seconds and then goes down to 0 V

Set the charger to "Pre-charge" mode and verify that the voltage ramps up to vehicle battery volt-

age

Set the charger to "Current demand" mode and verify that the current ramps up to meet the de-

mand of the vehicle

End the session using the stop button on the HMI and verify that the charging process stops

Comments and findings:

Responsible person

(optional) Customer

Please take into consideration that the document is only valid after signatures of technician or if included in the final

document delivered to the customer.

Installation and Commissioning Checklist for SICHARGE UC

Product Information, 03/2023, A5E52548271-AA

Checklist item

Name

Function

SICHARGE UC Dispenser

4.4 Commissioning

N/A

☐

Signature

☐

Table of Contents