Sleep and Hibernation Functions
Entering/Resuming from Sleep or Hibernation
To enter sleep or hibernation
Press the power switch (A) until a beep
Sleep: The power indicator (B) blinks green.
Hibernation: The power indicator (B) goes off.
There are another 2 ways to enter Sleep/Hibernation.
• Fn + T (
At the beep
, immediately release the power switch. After releasing the switch, do not operate it until the power indi-
cator blinks or goes off. If you press and hold the power switch for longer than 4 seconds, the computer will forcibly
shut down and unsaved data will be lost even if you have set [When I press the power button] to any item in [Change
what the power buttons do].
While the computer is entering sleep or hibernation, do not touch the computer.
For example, do not:
• Touch the keyboard, touchscreen or power switch.
• Use an external mouse or other peripheral devices.
• Connect or disconnect the AC adaptor.
• Operate the wireless switch.
• Insert and remove the SD Memory Card.
Wait until the power indicator blinks green (sleep) or goes off (hibernation).
It may take 1 or 2 minutes to enter sleep or hibernation.
In sleep or hibernation
Do not attach or remove a peripheral device. Doing so may cause malfunction.
Power is consumed in sleep. When power is exhausted, the data retained in memory will be lost. Connect the AC
adaptor when using the sleep function.
If the speakers are muted, beeps do not sound.
For Numeric keyboard model :
) (Sleep) / Fn + G (
- [Sleep] / [Hibernate].