To connect to the access point for connection in the stealth mode (ANY access denied), perform the steps below.
Click [Add] and select [Manually create a network profile].
Add a check mark for [Connect even if the network is not broadcasting] and set the access point.
For further setting information, ask the system administrator or the person in charge of the network.
Enabling/Disabling the Wireless LAN Standard IEEE802.11a (802.11a)
Click [802.11a Enabled] or [802.11a Disabled].
In some countries, communication using IEEE802.11a (5 GHz wireless LAN) standard is restricted by law.
The Wireless Switch Utility icon (
less WAN, not the setting of IEEE802.11a.
If IEEE802.11a is enabled or disabled while the computer is connected to an IEEE802.11b/g access point, the connec-
tion will be temporarily interrupted.
You can also change the IEEE802.11a setting in [Device Manager].
(Start) - [Computer] - [System properties] - [Device Manager].
A standard user needs to enter an administrator password.
Double-click [Network adapters] and double-click [Intel(R) Wireless WiFi Link 5100].
Click [Advanced], and then select [Wireless Mode] in [Property].
Select the settings in [Value] (e.g., [5. 802.11a/g]).
on the notification area and click [Network and Sharing Center]-[Manage wireless networks].
on the notification area.
) indicates the on/off status of wireless LAN and/or Bluetooth and/or wire-