"Remove disks or
other media. Press
any key to restart"
or a similar mes-
and operation is
A ﬂ oppy disk is in the drive and it does not contain system
startup information. Remove the ﬂ oppy disk and press any
If a device is connected to the USB port, disconnect the
device, or set [Legacy USB Support] to [Disabled] in
the [Advanced] menu of the Setup Utility. (
ence Manual "Setup Utility")
If the problem persists after having tried the above solu-
tions, it may be a ﬂ ash memory failure. Contact Panasonic
Manual "Setup Utility") to return the Setup Utility settings
(excluding the passwords) to the default values. Start the
Setup Utility and make the settings again. (Note that the
processing speed depends on the application software, so
this procedure may not make Windows faster.)
For Numeric keyboard model, select [Load Default Value]
in [Exit] menu by using
or connect a USB keyboard and press
If you installed a resident software after purchase, turn off
Disable the pop-up menu and Input Panel Tab.
A Open the Input Panel, and click [Tools] - [Options] -
B Remove the check mark of [Show the Input Panel tab]
and click [OK].
Disable Indexing Service in the following menu.
Click [start] - [Search] - [Change preferences] - [With
Indexing Service (for faster local service)].
in the Setup Utility