Panasonic Toughbook CF-U1AQB1G2M Operating Instructions Manual page 30

First-time Operation
30
7 Perform the touchscreen calibration.
At fi rst, log on to Windows as an administrator, and per-
form this calibration.
A Click (Start) - [Control Panel] - [Additional
Options] - [Tablet Calibration].
B Using the stylus, touch each of the 9 "+" target
marks one by one.
Perform the following calibration for each user.
A Click (Start) - [Control Panel] - [Mobile PC] -
[Tablet PC Settings].
B Click [Calibrate].
C Using the stylus, touch each of the 4 "+" target
marks one by one, and then click [OK].
A Click [start] - [Control Panel] - [Other Control Panel
Options] - [Touch Panel].
B Select [Calibration] in [Touch Panel Settings].
C Select [9 point], [12 point] or [20 point] in [Accuracy
required], and click [Apply].
Click [Calibrate Now] in [Calibration].
D
Using the stylus, touch each of the "+" target marks
E
one by one until it blinks, and then press
ter).
F Click [Update] in [Calibration].
Click [OK].
G
8 Create a new account.
A Click [start] - [Control Panel] - [User Accounts] -
[Create a new account].
CAUTION
Remember your password. If you forget the password,
you cannot use the Windows operation system.
Creating a password reset disk beforehand is recom-
mended.
(En-