B Tip the clip (B) front to pull it out of the com-
puter. (Do the same for the right side of hand
Open up the whole hand strap.
Press and hold (C) and slide the latch to
unlock the battery cover. (The illustration
shows Battery 1 as an example.)
Remove the battery cover.
Insert the battery pack matching with (D)
Then, slide down the battery pack (E).
Attach the battery cover.
Insert the claw (F) of the cover matching the
dent of computer, and press down the latch
side of cover to close.
Make sure the latch is on the "OPEN"
If the cover does not close ﬁ rmly, insert
the claw again. If the problem persists,
check if the battery is inserted properly.
Press and hold the battery cover and slide
the latch to ﬁ x.
(Take the steps D to H for Battery 2 as well.)
I Attach the hand strap back to the original
Take the steps A and B in the reverse order.
The computer does not operate without the
battery cover attached.
Make sure the latch is securely locked.
Otherwise the battery pack may fall when
you carry the computer.
Do not touch the terminals of the battery
pack and the computer. Doing so can make
the terminals dirty or damaged, and may
cause malfunction of the battery pack and