Panasonic Toughbook CF-U1AQB1G2M Operating Instructions Manual page 31

NOTE
PC Information Viewer
This computer periodically records the management information of the fl ash mem-
ory, etc. The maximum data volume for each record is 1024 bytes. This information
is only used for estimating the cause when the fl ash memory goes down by any
possibility. They are never sent to outside via network nor used for any other pur-
pose except for the purpose described the above.
To disable the function, add the check mark for [Disable the automatic save func-
tion for management information history] in [Hard Disk Status] of PC Information
Viewer, and click [OK].
( Reference Manual "Checking the Computer's Usage Status")
Precaution against Starting Up/Shutting Down
Do not do the following
Connecting or disconnecting the AC adaptor
Pressing the power switch
Touching the keyboard, touchscreen or external mouse
Turn on/off the wireless switch
To change the partition structure
You can shrink a part of an existing partition to create unallocated drive space,
from which you can create a new partition. This computer has a single partition in
the default setting.
A Click (Start) and right-click [Computer], then click [Manage].
A standard user needs to enter an administrator password.
B Click [Disk Management].
C Right-click the partition for Windows ("c" drive in the default setting), and
click [Shrink Volume].
The partition size depends on the computer specifi cations.
D Input the size in [Enter the amount of space to shrink in MB] and click
[Shrink].
You cannot input a larger number than the displayed size.
E Right-click [Unallocated] (the shrunk space in the step D) and click [New
Simple Volume].
F Follow the on-screen instructions to make the settings, and click [Finish].
Wait until formatting is completed.
NOTE
You can create an additional partition using remaining unallocated space or
newly creating unallocated space.
To delete a partition, right-click the partition and click [Delete Volume] in the
step C.
31