Header Pin-Out - Ublox EVK-NORA-B1 User Manual

2.13 Header pin-out

Figure 13 shows the 2.54 mm pitch headers exposing the IO signals in the NORA-B1 module.
Figure 13: EVK-NORA-B1 I/O pin-out
☞
EVK-NORA-B12 uses P1.08 as TX_EN and P1.09 as RX_EN FEM control signals. They are available
as test points near the NORA-B12 module on the PCB and N/C on J2.
⚠
The I/O pins of the EVK-NORA-B1 are not 5 V tolerant. Arduino Uno® style shields must be
configured to use +3.3 V DC (VSHLD) as the I/O voltage reference.
UBX-20030319 - R06
C1-Public
Hardware description
EVK-NORA-B1 - User guide
Page 17 of 31