Filter Lifetime Display - Ecosoft CROSS 90 Installer And User Manual

INSTALLER AND USER GUIDE FOR CROSS 90 DIRECT FLOW REVERSE OSMOSIS FILTER
5. USAGE
To replace the cartridge you need to make easy steps:
1. Turn the exhaust filter counterclockwise.
2. Pull the exhausted filter towards you.
3. Present a new filter in its respective housing with the handle in a horizontal position.
4. Insert firmly all the way and turn the handle 90 degrees clockwise.
5. Reset the filter cartridge: long press the corresponding filter cartridge reset key for 5 seconds,
the buzzer will sound once (1s), the corresponding filter cartridge life indicator will flash purple
twice and then turn on blue. The system will start flushing the respective filter for 5-6 minutes
(for CF and RO), indicator (1) flashes red. After this time expires, you must complete the rinsing of
the filters (RO and CB) by opening the purified water valve (3), and indicator 1 and the indicator
on the purified water valve will flash in the color corresponding to the current water quality. The
rinsing time for the RO filter is 30 minutes, and for the CB filter – 15 minutes. When the rinsing is
complete, indicator (1) and indicator (5) on the purified water valve light up blue.

5.3 FILTER LIFETIME DISPLAY

Time of life re-
Period of life
maining (days)
Normal > 15
There is little
≤ 15
left
Exhausted ≤ 0
This manual is the intellectual property of Ecosoft. Copying and reprinting is prohibited. © 2023
Liters of
Lifetime
capacity
display
remaining
Permanent
> 150
blue
Permanent
≤ 150
violet
Permanent
≤ 0
red
Acoustic
No alarm
One beep when there is little
time of life of the filters
Double beeps when filter
capacity or lifetime is ex-
hausted
15