INSTALLER AND USER GUIDE FOR CROSS 90 DIRECT FLOW REVERSE OSMOSIS FILTER
5. USAGE
5.6 SMART FEATURES
SMART features
Display
System indicator (1), filters
lifetime indicators (2-4) and
Leak inside the
machine.
faucet indicator (5) flashing
red
Filters lifetime indicators
Protection by
(2-4) and faucet indicator
pump time
(5) flashing red
Pressure loss while the
system is running: the
system runs for 90 seconds,
then the pump stops,
service life indicators (2-4)
Protection
flash blue, open purified
against lack
water valve (5) flashes red
of inlet water
pressure
No inlet pressure at system
start-up: service life
indicators (2-4) flash blue,
open purified water tap (5)
flashes red
Filters lifetime indicators
Protection by
(2-4) and faucet indicator
start / stop
(5) flashing violet
System indicator (1), filters
lifetime indicators (2-4) and
Low temperature
faucet indicator (5) flashing
protection
red
This manual is the intellectual property of Ecosoft. Copying and reprinting is prohibited. © 2023
Acoustic
Solution
When the leak is
Beeps for 3
eliminated, the alarm is
minutes
deactivated, and it returns
to the normal state
The pump has been
working between 30 and
3 beeps
33 minutes. Disconnect
and reconnect the
electrical connection
Open the inlet water
valve. Check the incoming
3 beeps
water supply line for
blockages
Open the inlet water
valve. Check the incoming
3 beeps
water supply line for
blockages
Disconnect and reconnect
4 beeps
the electrical connection
Disconnect and reconnect
5 beeps
the electrical connection
17