K-Framework3 - K-array Kommander-KA04 User Manual

B. Open the K-array website on the Internet browser on your
PC or Mac.
C. Navigate the Products->Software menu and scroll down to
the Download section of the Software webpage.
D. Download the osKar System (ensure to be registered
to the website in order to proceed with the download)
and save the update file with extension .mender into the
update folder on the USB drive.
E. Plug the USB drive to a free USB port on the amplifier rear
panel.
USB KEY (D:)
update
oskar-update-12-12-2022_13-03-1.6.6.mender
F. If not already operating, switch on the Kommander-KA
amplifier.
G. Connect your mobile device to the Kommander-KA
amplifier and access the embedded web app.
H. Naigate the user interface to the Advanced menu: the
Install via USB button activates when the USB drive
contains the .mender file in the proper folder.
I. Press on the Install via USB button to start updating the
Kommander-KA unit.
The update procedure lasts in about 15 minutes: after updating
the Kommander-KA04 amplifier unit reboots.
Kommander-KA04

K-framework3

The Kommander-KA04 unit can be remotely controlled with the
dedicated K-framework3 software available for PC and MAC on
K-array website.
The K-framework3 is the managing and
control software dedicated to professionals
and operators looking for a powerful tool for
designing and managing a large number of units
in demanding applications.
Sidebar
The K-framework3 operates in three modes:
• 3D – Design a loudspeaker system for your venue in a full
3D environment and make free field acoustic simulations;
• SETUP – import from the 3D design the active components
into the workspace or build from scratch a PA system
composed of active loudspeakers and amplifiers; use the
input and output groups to allow full control of the system;
• TUNING – Manage and control the loudspeaker system in
real time: optimize the performance of the loudspeaker
system during the tuning session and control its behavior
in live events.
The K-framework3 can work either off-line with virtual devices or
on-line with real active loudspeakers and amplifiers connected
over the same Ethernet network.
USER GUIDE
WINDOWS and OSX software
K-framework3
Menu bar
Workspace
Toolbar
17