Table of Contents
Advertisement
2.2
MECHANICAL SPECIFICATIONS
Materials
Housing:
Exceptions:
Cage:
Dimensions:
Weight (in cage): 11.5kg (air), 8.5kg (water).
Depth Rating:
Connectors
Instrument:
Comms Cable:
Switching Plug: 10 pin male Subconn line type (MCIL10M), with lock ring. Note
2.3
PERFORMANCE SPECIFICATIONS
Memory:
Internal Power: 8 x 1.5v alkaline C cells. The unit will accept 8 x 3.6v Lithium C
External Power: Between 9 and 30v DC.
Current Drain:
Sampling Rate: 1, 2, 4 or 8Hz (synchronised)
Data Output:
M
WLR Hardware Manual
IDAS
Titanium or acetal, as ordered
Temperature sensor is titanium.
Stainless steel (316 grade) with polypropylene clamping brackets
Instrument - 88mm Ø, 550mm long (including connector)
Cage – 750mm long x 140mm x 120mm
Acetal 500m (unless smaller pressure sensor fitted)
Titanium 6000m (unless smaller pressure sensor fitted)
10 pin female Subconn bulkhead type (MCBH10F) with lock ring.
Valeport 3m Y lead. 10 pin male Subconn line type (MCIL10M) to
instrument, 2 x 4mm bunch pins to external power, 9 pin female D
type to PC.
that the switch cap contains wiring links to activate the instrument
It is not a dummy plug.
16Mb solid state memory (upgradeable in 16Mb steps to 64Mb)
cells with no alterations required. Do not mix battery types.
25mA at 12v when running, and 0.25mA when in sleep mode.
RS232, RS485 or RS422, depending on pin selection. Baud rate
is user selectable from 2400 to 460800
Page 6
© Valeport Limited
0730877D.doc
Advertisement
Table of Contents
