Digital Watchdog VMAX IP G4 DW-VG416 T16P Series User Manual page 53

53
PROTOCOL
Select the proper protocol of the connected PTZ camera. This determines the protocol that the
camera and NVR communicate with. This field does not need to be changed if the camera is
connected to the NVR over the network via the ONVIF protocol. Default is ONVIF PTZ.
BAUD RATE
Select the baud rate level from 2,400bps up to 57,600bps. This determines the rate that information
is transferred between the camera and NVR. This field does not need to be changed if the camera is
connected to the NVR over the network via the ONVIF protocol.
ADDRESS
Set the P/T/Z driver address of the connected camera. This determines which camera to send PTZ
signals to if connected by RS-485 and should be the same address as that of the PTZ camera. This
field does not need to be changed if the camera is connected to the NVR over the network via the
ONVIF protocol.
CONTROL (The functions depends on the camera's model and supported features)
When the [SET] button is clicked, the OSD menu of the camera will appear on the monitor. Set the
PTZ's speed, preset, tour, auto-pan, etc.
• Direction buttons: move camera up/down & left/right.
• M (depends on the PTZ model): Show/ hide the camera's
OSD menu on the NVR monitor. Use the directional arrows
to navigate the menu options.
• ZOOM/FOCUS/IRIS: Control IN (+)/OUT (-) for each
function. (Depending on the camera's model and
supported features).
• Speed: Change the PTZ speed (0~100). This sets the
speed at which the camera will move when controlled
from the NVR using the virtual joystick. Save the changes
by clicking [SET].
• Preset: Select the PTZ preset position that was created within the PTZ camera itself. Preset
position setup must be configured within the camera's web interface.
o ADD: Move the camera's position and zoom to the desired position. Select the
preset number using the
system supports preset the number of presets from 1 to 255.)
o
DEL: delete the preset currently selected.
o MOVE: Enter a present number and press [Move] to move the camera to the preset
position of that number.
o
TOUR: Set the camera to move between preset positions
in order. The camera will keep running the tour until it
manually is disabled.
o AUTO-PAN: Set the camera to move 360 ° in one
direction. The camera will keep running the auto-pan until
it manually is disabled.
o GUARD-TOUR: Set the camera to move between
selected presets in a set order and interval. The camera will keep running the guard
tour until it is manually disabled.
Set: Set the Interval (Sec) and select the preset position. Add to Sequence

by clicking the
indicating the preset number and the set interval time.
Delete: To delete a preset position from the sequence, select the preset in

the Sequence column and click the
button. Press [ADD] to save the new preset. (The
button. The preset will appear in the Sequence column
VMAX





button.
IP G4™
®



