Digital Watchdog VMAX IP G4 DW-VG416 T16P Series User Manual page 23

23
If you are using a Digital Watchdog camera that supports the CCIP encryption option, check
the button on the camera's setup page as shown (※).
When enabled, images from the camera will be seen through the current NVR only.
Quick Setup
Users can set up multiple cameras with the same recording settings simultaneously.

1. Select the model or camera multi-select for Quick
Setup. When selecting 'Model' for the Method, all
cameras with the same model's name will be selected.
2. When selecting 'Camera multi-select', the user can
select which cameras to set. If you set the desired
cameras to 'ON', the user can set up the settings of
the selected cameras.
3. Click the [GET STREAM] button and get the current
stream information.
4. Click the [Get INFO] button and check the current
setup for the cameras.
5. Change setup and click [SAVE].
6. "CAMERAS ARE SUCCESSFULLY APPLIED" message will appear when the process has been
completed.
Change Channel
ADMIN users can reassign camera channels by dragging & dropping cameras in the live display
screen.
Channel PoE Port Channel
No. No. Title
In Live Mode, users can check the status of PoE cameras by selecting the [PoE STATUS] menu.
Note
Only the ADMIN user can change the channel allocation.
Select a camera by clicking-and-dragging it to its new channel. While
dragging a camera, the mouse pointer will change to
a PoE camera, the connected PoE port number and currently assigned
channel will be shown as in the example below.
VMAX IP G4™
®



. In the case of