Menu Features And Programming Instructions; Adjusting The Temperature - Jacuzzi J-200 Owner's Manual

J-200
11.0

Menu Features and Programming Instructions

Your hot tub is equipped with menus that allow you to program additional
features. By continually pressing the Menu/Select (
cycle through the menus as follows:
Current temperature (Main Menu)
Temp
Mode (page 33)
Set Time/Time (page 34)
Flip (page 34)
Lock (page 34)
Hold (page 35)
Filter Cycle 1 (page 36)
Filter Cycle 2 (page 37)
Preferences (page 38)
Utilities (page 39)
11.1

Adjusting the Temperature

The hot tub is equipped with dual temperature ranges. The high range
settings can be used for everyday heating. The low range settings can
be used as an away setting. Pressing or holding the
will adjust the set temperature. See Preference settings for selecting
a Fahrenheit or Celsius display, page 38. The default temperature
setting is 100°F (38°C)
Note: Automatic Function - Pump 1 low speed activates periodically to
circulate the water and determine the water temperature.
A. High Range Temperature (default setting)
The high temperature range is between 80°F (26.5°C) and
104°F (40°C). When the spa is in this setting it will display this
icon . To adjust the temperature, follow the steps below.
Note: If no button is pressed within 5 seconds of each selection the
screen will revert back to the Main Menu and the current settings will
remain active.
32
) button you will
or buttons