Preferences - Jacuzzi J-200 Owner's Manual

J-200
11.8

Preferences

This menu allows you select certain display preferences.
A. Setting the temperature display
1. From the Main Menu, press the
2. Press or
3. Pressing
4. Once you make your selection, press the
change.
B. Setting the time display
1. From the Main Menu, press the
2. Press or
to enter the time display menu "24-12."
3. Pressing
4. Once you make your selection, press the
change.
C. Reminders
Your spa is equipped with 3 reminders.
• Change Water occurs every 125 days, page 51.
• Change Filter occurs every 180 days, page 52.
• Change UV Bulb occurs every 365 days, page 52.
1. From the Main Menu, press the
2. Press or
until you get to the "REMINDERS" display.
3. Press or
4. Once you make your selection, press the
change.
5. Once the timer expires and the reminder appears on the display,
press or
D. Cleanup Cycle Duration
1. From the Main Menu, press the
2. Press or
until you get to the "CLN UP" display.
3. Press or
4.0H, in increments of 30 minutes.
4. Once you make your selection, press the
change and revert back to the "PREF" Menu.
E. Poll Cycles Duration - Ready Mode Only
(In order to maintain a constant water temperature, heat as needed, and
refresh the temperature display the pumps actives to circulate the water.
This is known as "polling." Default setting is ON.)
38
to enter the menu. The display will show "F/C."
or will toggle between °F or °C.
to enter the "F/C" menu. Then press the
will toggle between "24HR" and "12HR."
or
to enter the
to select and toggle between "YES" and "NO."
to reset the timer.
to enter the
to move through the duration's settings of 0.5H up to
button until you reach "PREF."
button to accept the
button until you reach "PREF."
button to accept the
button until you reach "PREF."
menu. Then press the
button to accept the
button until you reach "PREF."
menu. Then press the
button to accept the
button
button
button