Table of Contents
Advertisement
1.6. ASV Overflow and Alarm System
An Auto Shutoff Valve (ASV) Water Sensor and Alarm System has been installed in this AIRaider to
provide overflow detection. If an overflow is detected, an electrically powered, motorized ball valve
will automatically shut off the AIRaider's water supply and prevent potential further water overflow.
The ASV controller features an audible alarm and a flashing light to alert residents that water was
detected outside of the system and that the water supply valve was closed in response.
The ASV system includes the following components: (Figures 1 & 2)
• Motorized Ball Valve (Factory Installed on AIRaider)
• Control Unit
• Water Sensor Pad
• Power Adapter
• Control Harness
• Mounting Hardware
• Installation Instructions
Figure 1
ASV System - Installed
1.6.1. Remove the ASV system's control panel, water sensor, control harness, and power adapter.
Determine a suitable mounting location for the control panel and water sensor in relation
to the planned location of the AIRaider unit, keeping mind of the length of the control harness
and power adapter wiring.
IN063 Rev.E
PRE-INSTALLATION
ASV System Components
3 Saber Way, Ward Hill, MA 01835 | radonaway.com
Figure 2
Page 6 of 26
Advertisement
Table of Contents
