General Information; Intended Use Of The User Guide; Product Naming Convention - Danfoss EM-PMI540-T4000 User Manual

User Guide
EM-PMI540-T4000

General information

Intended use of the user guide

Product naming convention

© Danfoss | April 2023
This user guide is the installation, operation and maintenance user guide for the EM-PMI540-T4000
electric machine.
This user guide contains instructions necessary to safely and properly handle, install, operate and
maintain the electric machine. They should be brought to the attention of anyone who installs, operates
or maintains the machine or associated equipment.
All of the safety warnings and instructions in this user guide must be followed to prevent injury to
personnel or damage to property. Only qualified and authorized personnel, familiar with health and
safety requirements and national legislation, shall be permitted to handle, install, operate and maintain
the device.
This user guide must be kept for future reference during installation, operation and maintenance.
This user guide uses illustrations as examples only. Illustrations in this user guide may not necessarily
reflect all system features.
Frame model indicates dimensions and electrical characteristics of the electric machine. The following
naming convention is used to refer to the electric machine frame model:
•
EM-PMI540-T4000-XXXX+XX
The naming codes of the electric machine
Part of the name
EM
PMIXXX or PMEXXX
TXXXX
XXXX
+XX
The power input of the machine may require one or several three phase power systems. This is indicated
by a power connection option marking, for example: DUAL or QUAD in the machine model code. One
three phases power system can include one or three connection boxes in the machine. The most usual
case is when an electric machine has a single connection box, but this is not shown in the machine
model code.
•
Example: EM-PMI540-T4000-1600-QUAD
The electric machine can include some of the options available. The options of the electric machine are
shown also in the rating plate, following the frame model code. Note! Only options that differ from the
standard delivery are indicated. For detailed information of the models, options and characteristics, see
product data sheets.
Meaning
Electric Machine
Permanent Magnet Internal and a number relative to
the diameter of the electric machine, or Permanent
Magnet External and a number relative to diameter of the
electric machine
Average continuous torque of the motor range, relative
to the lenght of the machine
Rated rotation speed
Options. Standard options are indicated by a star (*).
BC265857716810en-000202 | 5