Personal Protective Equipment; Security Features - Danfoss EM-PMI540-T4000 User Manual

User Guide
EM-PMI540-T4000
Safety information

Personal protective equipment

Security features

10 | © Danfoss | April 2023
Magnet warning
The symbol is identified by a yellow background, black triangular band, and a black magnet
symbol. It indicates strong magnetic field that could cause harm to a person or property.
Rotating shaft warning
The symbol is identified by a yellow background, black triangular band, and a black rotating
shaft symbol. It indicates strong rotating shaft that could cause harm to a person or property.
General Information.
Read the instructions in the user guide.
Personal protective equipment shall be used when necessary during handling, installation and
maintenance of the electric machine to avoid injury.
Use eye protective equipment like safety goggles or mask when you work with the electric
machine. Permanent damage to the eye could be caused if bearing grease, melted nitrile
rubber (radial lip seal), glycol or other fluids splash.
Use hearing protective equipment when you work on the electric machine. Hearing injuries
can be caused by too loud noise (noise in excess of 85 dBA).
Use head protective equipment like helmet when you lift the electric machine! Head injuries
can be caused by object impact.
Use cut resistant gloves when you handle and maintain the electric machine. There is a risk of
cut injuries.
Use protective footwear when you lift or move the electric machine! Foot injuries could be
caused if lifting system or lifting brackets fail.
The electric machine has 12 x PT100 temperature sensors in the windings. The temperature signals can
be read out from the measurement connector of the electric machine. You can connect any of the
BC265857716810en-000202