Advertisement
4. At the completion of the cycle open the door and check that there is warmth inside the dryer. This indicates the
dryer is operating normally.
If there are any problems, you must address these before proceeding with normal use. The
dryer will automatically turn off at the end of the cycle if there are no problems.
Before you start, it is a good idea to go through the following checklist:
1. Has the packaging been removed?
2. Is the machine correctly levelled, and the cabinet corners clear of the floor and walls?
3. Are the water tank, condenser and lint filter correctly in place?
4. Has the power cord been connected to an appropriate power supply and the power turned on?
5. Have you performed the installation test cycle?
6. If external draining is preferred, is the white drain hose attached to the correct outlet and hooked into a
standpipe or tub?
Capacity (kg)*
8
Width
Depth
Height**
Length of drain hose
Volts
220 – 240
HZ
Amps (maximum)
Heating Power (W)
https://producthelp.fisherpaykel.com/Manuals/Dryer_Manuals/User_Guides/428104B_Dryer/03_Installation_instructions
Machine specifications - DE8060P
Dimensions (mm)
595
650
845
1300
50
10
900
Electrical
Updated: Sun, 09 Apr 2023 02:45:01 GMT
Powered by
6
Advertisement
