IEEE 1394 Devices
You can connect a digital video camcorder or other IEEE 1394 standard device to the computer.
To connect IEEE 1394 device
Attach the device for the media containing the driver (e.g., CD-ROM). Equipment connected to the multimedia pocket
cannot be recognized if connected after the IEEE 1394 device driver installation screen appears.
Turn on the computer and the IEEE 1394 device.
Slide the latch (A) and open the cover, and connect the IEEE
1394 device to the IEEE 1394 interface connector (B).
For further information, refer to the instruction manual of the IEEE 1394 device.
You may need to install the driver for the IEEE 1394 device. Follow the on-screen instructions or refer to the instruction
manual of the IEEE 1394 device.
To remove IEEE 1394 device
Turn off the IEEE 1394 device only after turning off the computer.
Turn off the computer and disconnect the cable from the IEEE 1394 interface connector.
Turn off the IEEE 1394 device and remove the cable.