Panasonic Toughbook CF-30C3DAZBM Reference Manual page 32

PC Card / ExpressCard
NOTE
Check the card's specification to prevent the total operating current from exceeding the allowable limit. Otherwise mal-
function may occur.
Allowable Current: 3.3 V: 400 mA, 5 V: 400 mA
Some types of cards cannot be used simultaneously.
After repeating insertion and removal, some types of card will not be recognized. In this case, restart the computer.
If the computer freezes after resuming from sleep or hibernation, remove and reinsert the card. If the problem persists,
restart the computer.
When a card is inserted, power consumption increases. Remove the card when it is not in use, especially when oper-
ating by battery power.
To connect peripheral devices (SCSI, IEEE 1394, etc.) using a PC Card or an ExpressCard, follow the steps below
(one example).
Connect the peripheral device to the card.
A
Turn on the power of device.
B
Insert the card until it surely fits in the slot.
C
32