Disabling/Enabling Wireless Communication
When you set [Wireless Switch] to [Disabled] in the [Advanced] menu of the Setup Utility (
Switch Utility icon will not appear in the notification area. All wireless equipment (wireless LAN, wireless WAN) will
remain ready irrespective of the wireless switch setting.
It may take some time to turn off wireless communication after switching the wireless switch off.
If the IEEE802.11a setting is changed in [Device Manager] (
Wireless Switch Utility
This utility allows you to control the function of the wireless switch. This utility also allows you to enable or disable wireless
devices from a pop-up menu. In the default setting, all wireless devices are enabled.
The Wireless Switch Utility icon
The icon appears when click
: Indicates that the wireless devices are enabled.
: Indicates that the wireless devices are off.
: Indicates that the wireless devices have been disabled in the Setup Utility.
To enable or disable particular wireless devices
Click the Wireless Switch Utility icon to show the pop-up menu.
Select ON or OFF for the device you want to enable or disable.
To change the function of the wireless switch
In the default setting, the wireless switch enables devices that you select turning the wireless switch off last time. You can
change this function.
[Selects the device for which to turn the device status on each time with the dialog box.]
Display a dialog each time you set the wireless switch to ON so you can choose which wireless device to enable.
[Turns on the following device.]
Only selected devices are enabled when you set the wireless switch to ON.
[Turns on the device that was on immediately before the wireless switch was turned off the last time.]
When you turn on the wireless switch, the on/off settings that were selected when you last turned off the wireless
switch will be restored.
on the notification area. It shows the status of wireless devices.
70), the display will be changed accordingly.
78), the Wireless