PC Card / ExpressCard (only for model with Express Card slot)
A card does not work.
SD Memory Card
Cannot use an SD Memory Card.
Smart Card (only for model with Smart Card slot)
Cannot use a Smart Card.
Insert the card correctly.
The card does not conform to the card standard.
Restart the computer after installing a driver (of card or other device).
Set [PC Card Slot] and [ExpressCard Slot] to [Enabled] in the [Advanced] menu
of the Setup Utility (
The port settings are not correct.
Read the instruction manual of the card or contact the manufacturer of the card.
Remove the card and insert it again (
The driver is not compatible with the operating system.
Set [SD Slot] to [Enabled] in the [Advanced] menu of the Setup Utility (
Insert the Smart Card correctly.
Set [Smart Card] to [Auto] in the sub-menu of [Serial and Parallel Port Settings]
in the [Advanced] menu of the Setup Utility (
To use a Smart Card, you need a specified software and driver.