Table of Contents
Advertisement
Walkera All Rights Reserved
2 Open
1 Press
Ready to fly
Power on and connect
Note: Before the aircraft is powered on, make sure the Camera shield is removed to affect the aircraft self-test.
1) Long press the power switch to turn on the remote control.
2) Short press the battery power switch once, then long press the power switch for 3~5 seconds to turn on the aircraft.
3) Put the aircraft in the horizontal position, wait until the aircraft status indicator turns from yellow light flashing fast
to green light flashing slow, and the buzzer turns to not beeping, which indicates the success of connection and pairing.
1
Connect mobile devices
Open the WLAN setting item of the mobile device, wait for about 30 seconds, when WK-GRD-X X X X X X appears
in the available WLAN list, click " WK-GRD-X X X X X X " and enter the password " 12345678 " to connect, exit the
setting after successful connection interface.
Download offline maps
Find the "WK Fly" icon on the desktop of the mobile device system and click Run WK Fly APP→ Click "
→ Drag and zoom the map on the screen with two fingers, place the map area to be downloaded in the yellow box,
then click "Download" to download the offline map of the area, click "
return to the main interface after the download is completed.
Activate and fly the aircraft and bind the device
The new T210 MINI must be activated and bound to the device through the WK Fly App, please turn on the power
of the aircraft and the remote control respectively, run the WK Fly App after connecting the mobile phone, and
operate according to the interface prompts. An internet connection is required during activation.
Click "
CONNECTION GUIDANCE
interface prompts → Swipe left or right to find " T210 MINI " → Then click "
2
" → on the main interface Activate the aircraft and bind the device according to the
T210 MINI(WKRC-H9)Operation guide
3
" in the upper left corner of the APP to
" to enter the flight interface.
GO FLY
"
Offline Map
13
Advertisement
Table of Contents
