Table of Contents
Advertisement
YF360D Series Router User Manual
re-connection, otherwise it is no need if disable
Local WAN Interface: local addresss of the tunnel
Remote Host Address: IP/domain name of end opposite; this option can not fill in if using tunnel
mode server
Local Subnet: IPSec local protects subnet and subnet mask, i.e. 192.168.1.0/24; this option can
not fill in if using transfer mode
Remote Subnet: IPSec opposite end protects subnet and subnet mask, i.e.192.168.7.0/24; this
option can not fill in if using transfer mode
Local ID: tunnel local end identification, IP and domain name are available
Remote ID: tunnel opposite end identification, IP and domain name are available
Detection: this part contains configure information of connection detection
Enable DPD Detection: enable or disable this function, tick means enable
Time Interval: set time interval of connect detection (DPD)
Timeout: set the timeout of connect detection
Action: set the action of connect detection
Advanced Settings: this part contains relevant setting of IKE, ESP, negotiation mode, etc.
st
nd
Enable Advanced Settings: enable to configure 1
and 2
phase information, otherwise it
will automic negotiation according to opposite end
IKE Encryption: IKE phased encryption mode
IKE Integrity: IKE phased integrity solution
IKE Grouptype: DH exchange algorithm
IKE Lifetime: set IKE lifetime, current unit is hour, the default is 0
ESP Encryption: ESP encryption type
ESP Integrity: ESP integrity solution
ESP Keylife: set ESP keylife, current unit is hour, the default is 0
IKE aggressive mode allowed: negotiation mode adopt aggressive mode if tick; it is main
Page 46 of 79
Advertisement
Table of Contents
