Four-Faith YF360D Series User Manual page 20

there has 4G network option. Users select different mode depending on their need
DHCP-4G
IP address of WAN port gets automatic via DHCP-4G
Keep Online
This function is used to detect whether the Internet connection is active, if users set it and when
the router detect the connection is inactive, it will redial to users' ISP immediately to make the
connection active.
Detection Method:
None: do not set this function
Ping: Send ping packet to detect the connection, when choose this method, users should also
configure "Detection Interval", "Primary Detection Server IP" and "Backup Detection
Server IP" items.
Route: Detect connection with route method, when choose this method, users should also
configure "Detection Interval", "Primary Detection Server IP" and "Backup Detection
Server IP" items.
PPP: Detect connection with PPP method, when choose this method, users should also
configure "Detection Interval" item.
Detection Interval: time interval between two detections, unit is second
Primary Detection Server IP: the server used to response the router's detection packet. This item
is only valid for method "Ping" and "Route".
Backup Detection Server IP: the server used to response the router's detection packet. This item
is valid for method "Ping" and "Route".
Note: When users choose the "Route" or "Ping" method, it's quite important to make sure
that the "Primary Detection Server IP" and "Backup Detection Server IP" are usable and stable,
because they have to response the detection packet frequently.
Force reconnect: this option schedules the pppoe or 3G reconnection by killing the pppd daemon
and restart it.
Time: needed time to reconnect
Page 20 of 79
YF360D Series Router User Manual