Four-Faith YF360D Series User Manual page 31

G-only：Only supports the 802.11g standard wireless devices.
NG-Mixed：Support 802.11g, 802.11n wireless devices.
N-only：Only supports the 802.11g standard wireless devices.
8021.11n Transmission Mode：In the wireless network mode to "N-only" choose to transfer its
transmission mode.
Greenfield: When you determine the surrounding environment, there is no other 802.11a/b/g
devices use the same channel, use this mode to increase throughput. Other 802.11a/b/g devices use
the same channel in the environment, the information you send may generate an error, re-issued.
Mixed：This mode is contrary to the green mode, but will reduce the throughput.
Wireless Network Name(SSID): The SSID is the network name shared among all devices in a
wireless network. The SSID must be identical for all devices in the wireless network. It is
case-sensitive and must not exceed 46 alphanumeric characters, which may be any keyboard
character. Make sure this setting is the same for all devices in your wireless network.。
Wireless Channel： A total of 1-13 channels to choose more than one wireless device environment,
please try to avoid using the same channel with other devices.。
Channel Width：20MHZ and 40MHZ。
Extension Channel：Channel for 40MHZ, you can choose upper or lower.
Wireless SSID Broadcast：
Enable：SSID broadcasting.
Disable：Hidden SSID.
Network Configuration：
Bridged：Bridge to the router, under normal circumstances, please select the bridge.
Unbridged：There is no bridge to the router, IP addresses need to manually configure.
Virtual Interfaces：Click Add to add a virtual interface. Add successfully, click on the remove,
you can remove the virtual interface。
AP Isolation：This setting isolates wireless clients so access to and from other wireless clients are
Page 31 of 79
YF360D Series Router User Manual