Troubleshooting; Soft Reset; Reset To Factory Settings; Faq - Cardo Systems PACKTALK CUSTOM Manual

6. TROUBLESHOOTING

6.1 SOFT RESET

If your PACKTALK CUSTOM stops responding, reset it in one of these ways:
Turning it off and then on again (see Switching Your Unit On/Off).
●
Rebooting the unit, by simultaneously pressing
●

6.2 RESET TO FACTORY SETTINGS

This option deletes all paired units, devices and all configuration settings.
To perform a factory reset through the unit:
1. Check that your PACKTALK CUSTOM is in Standby mode.
2. Simultaneously press
The LED flashes red 5 times.
3. A factory reset can also be performed with the Cardo Connect App.

6.3 FAQ

Additional answers to common problems can be found
+ + 10 seconds.
+ for 10 seconds.
here.
31