Setting Upnon-Dmcintercom - Cardo Systems PACKTALK CUSTOM Manual

Hide thumbs Also See for PACKTALK CUSTOM:

Table of Contents

5.2.1 SETTING UPNON-DMCINTERCOM

DMCis always the best way to connect a group of riders. If you happen to ride with a group of riders that do not

have DMCdevices (such as Bluetooth communicators by Cardo or by other brands), you can switch your unit to

Bluetooth mode and create or join a non-DMCgroup. The participating riders are connected in a chain with a

maximum total of four riders.

To set up a non-DMC intercom (Cardo or non Cardo) :

1. Confirm your Cardo unit is in Standby Bluetooth intercom mode (LED flashes blue slowly).

If your unit is not in Bluetooth intercom mode, use the Cardo Connect App. Select intercom, then Bluetooth

Mode. For more information see,

Universal Bluetooth Intercom for non-Cardo units: a non-Cardo unit should be on phone pairing mode.

2. To initiate 2-way pairing:

Select Intercom

The non-DMCrider needs to start universal intercom pairing, Bluetooth intercom pairing or OBi pairing on his

unit.

3. To add a 3rd rider:

Switching between Intercom modes

Switch to Bluetooth mode

on page 30.

Select the Bluetooth rider

Table of Contents

Do you have a question about the PACKTALK CUSTOM and is the answer not in the manual?