Troubleshooting; Soft Reset; Reset To Factory Settings; Faq - Cardo Systems FREECOM 1 Manual

6. Troubleshooting

6.1 Soft Reset

If your FREECOM 1 stops responding, reset it by turning it off and then on again (see "Switching Your Unit On/Off" on
page 6

6.2 Reset to Factory Settings

This option deletes all paired devices.
To perform a factory reset through the headset, do one of the following:
● To use the headset buttons:
a. Check that your FREECOM 1 is in Standby (see "Modes and Events FREECOM 1" on page 6).
b. Simultaneously press ~Intercom+~Volume Up+~Volume Down for 5 seconds
● To use SmartSet:
a. Check that your FREECOM 1 is in Standby (see "Modes and Events FREECOM 1" on page 6).
b. Open SmartSet and tap the menu icon.
c. Tap Settings.
d. Tap Reset to Factory.

6.3 FAQ

Additional answers to common problems can be found at www.cardosystems.com/faqs.
- 18 -
FREECOM 1 Manual
6. Troubleshooting