Using Yourpacktalk Custom; Pairing Yourunit To Bluetooth Devices - Cardo Systems PACKTALK CUSTOM Manual

The LED flashes red three times, confirming that your unit is switching off. The speaker plays a sound and a
voice message indicates the battery status, "Battery Status X% ".

2.5 USING YOURPACKTALK CUSTOM

You can operate the various features of your PACKTALK CUSTOM in the following ways:
Press a button or a combination of buttons on the unit
●
Use the Cardo Connect App on your mobile device (once it is paired with the unit)
●
Use natural voice operation (by saying a command, for example "Hey Cardo, Radio On").
●

2.6 PAIRING YOURUNIT TO BLUETOOTH DEVICES

Your PACKTALK CUSTOM has one Bluetooth channel for connection to Bluetooth devices such as mobile phones,
GPSdevices, and TFT Bike Infotainment.
A second Bluetooth channel for second phone, GPSor TFT is available with Pay-Per-Feature.
To connect your unit to a Bluetooth device, you must first pair them. Once paired, they automatically recognize
each other whenever they are within range.
If you are pairing the unit to more than one mobile phone, the phone paired with channel 1 is the default
●
phone for outgoing calls.
To pair to a mobile phone:
1. Enable Bluetooth on your mobile phone.
2. On the unit in standby mode, press
The LED flashes red and blue.
3. On your mobile phone, search for Bluetooth devices.
4. When your PACKTALK CUSTOM appears in the list of available devices, select it.
If prompted for a PIN or Passkey, enter 0000 (four zeros). If prompted to allow pairing on your phone, allow it.
for 5 seconds.
6