Cardo Systems PACKTALK CUSTOM Manual page 7

The phone confirms that pairing has succeeded and the LED flashes purple for 2 seconds. A voice message
confirms "Phone connected".
To pair to another Bluetooth device:
1. Enable Bluetooth on the device (for example, your second mobile phone, GPSdevice., or TFT).
2. On the unit in standby mode press
The LED flashes red and blue rapidly.
3. Depending on the Bluetooth device:
a. For a GPS, tap
b. For a TFT, roll the control wheel backward.
c. For a second phone, roll the wheel forward.
The led flashes red and green.
4. On the device you are pairing, search for Bluetooth devices.
5. When your PACKTALK CUSTOM appears in the list of available devices, select it.
If prompted for a PIN or Passkey, enter 0000 (four zeros). If prompted to allow pairing on your phone, allow it.
The device confirms that pairing has succeeded and the LED flashes purple for 2 seconds.
If pairing is not completed within 2 minutes, the unit automatically returns to Standby.
●
Not all Bluetooth GPSdevices allow connection to Bluetooth audio devices. Consult your GPSUser Manual
●
for more information.
for 5 seconds.
once.
7