6. Loosen the two captive screws securing the keyswitch adapter assembly to the
system, and carefully pull the assembly from the enclosure.
SCSI tray
adapter
assembly
Sun Enterprise 5000—Front View
FIGURE 1-4
7. Remove the boards and power supplies from the rear of the system and place
them on a padded ESD mat.
Note – Label each board with its respective slot number, or otherwise record the
sequence in which each board is removed.
Chapter 1
Sun Enterprise 5000 System Centerplane Upgrade Procedure
Keyswitch
adapter
assembly
Power
cooling
module (PCM)
1-5