Advertisement
806-1552-10-A.doc Page 2 Tuesday, July 27, 1999 12:39 PM
8
Installing the CD-ROM Drive
5
4
6
1
Refer to panel 9 for more information.
1 Remove the front bezel by squeezing the latches at each end.
2 Disassemble the system and remove the PCI card (if fitted) as shown in
panel 5. 3 Squeeze and pull out the blanking panel. 4 Slide the connector card
into the slot behind the CD-ROM drive bay. 5 Connect the cable to the connector
under the PCI card. 6 Slide in the CD-ROM drive until the catch clicks. 7
Replace the other components in the reverse order to that in which you removed
them.
Black spot plate
Advertisement
